Posts

integration & connectors blog series

Integrations & Connectors Update: Latest Versions of Genetec, Lenel, Honeywell, Software House and More…

The Vidsys team is excited to announce our latest entry in our blog series – Integrations & Connectors Update – where we highlight new connectors and integrations that are available for our technology platform. Our Converged Security and Information Management (CSIM) software has the ability to integrate any type of software or physical hardware technology with our system.

The following Physical Access Control System Connectors have been added to our library:

  1. Genetec Security Center v5.6 Synergis IP
  2. Lenel OnGuard 7.3
  3. Software House C*CURE 9000 v2.5
  4. Honeywell Pro-Watch 4.2

Using Vidsys’ CSIM Platform, security organizations can integrate and analyze information from traditional physical security devices and systems, and resolve situations in real time.

Vidsys ACS connectors integrate 3rd party Access Control Systems with the Vidsys Converged Security & Information Management (CSIM) software. This integration allows events detected by the integrated access control managed sensors and card readers to be relayed to and annunciated by the Vidsys CSIM platform.   It also allows CSIM operators to control discovered devices that are connected to the access control system.  The connector automatically maps the access control system event types to standard CSIM Situation types and translates Vidsys CSIM software command syntax to that of the third-party access control system.

CSIM operators can also easily display the access control history and location of any badged holder configured within the access control system. The Vidsys operator needs no specific card holder information and simply searches using part of the card holder’s name. An up to date list of results is displayed directly within the Vidsys user interface. Alarm logs for devices can also be accessed.

Vidsys offers a growing list of connectors that enable integration between the Vidsys CSIM platform and other industry-leading converged and physical security products.

If you would like to find out more about this integration or other integrations, contact us for more information or a demo.

 

This entry is part of a blog series on Integrations and Connectors. You can revisit previous entries here

Vidsys Integrations & Connectors

Integrations & Connectors Update: Latest Versions of Salient, Bosch, NUOO, Avigilon ACC and More…

The Vidsys team is excited to announce our second entry in our new blog series – Integrations & Connectors Update – where we highlight new connectors and integrations that are available with our technology platform. Our Converged Security and Information Management (CSIM) software has the ability to integrate any type of software or physical hardware technology with our system.

Vidsys is pleased to announce the addition of the following Video Connectors to its existing library of connectors:

  1. Salient CompleteView v4.7
  2. Bosch Video SDK v6.11
  3. NUOO v4.6
  4. Avigilon ACC v6.4

Using Vidsys’ CSIM Platform, security organizations can integrate and analyze information from traditional physical security devices and systems, and resolve situations in real time.

Vidsys NVR connectors integrate 3rd party NVR/DVR’s with Vidsys CSIM software, allowing operators to view real-time and recorded video from their desktops.  Video can be displayed in response to manual user selection and can be automatically displayed when an event detected by CSIM-integrated access control, intrusion detection or another system is reported.

CSIM operators can control PTZ cameras and playback stored video using standard controls (forward, pause, reverse, etc.) that are consistent across different video recorder products.  Operators may define and store video clips and snapshots in CSIM situation records to facilitate post-event analysis.

Vidsys offers a growing list of connectors that enable integration between the Vidsys CSIM platform and other industry-leading converged and physical security products.

If you would like to find out more about this integration or other integrations, contact us here for more information or a demo.

 

This entry is part of a blog series on Integrations and Connectors. You can revisit previous entries here

integration & connectors blog series

Integrations & Connectors Update: Latest Versions of Milestone XProtect, Pelco VideoXpert, Avigilon ACC and More…

The Vidsys team is excited to announce a new blog series – Integrations and Connectors – where we will highlight new connectors and integrations that are available with our technology platform. Our Converged Security and Information Management (CSIM) software has the ability to integrate any type of software or physical hardware technology with our system.

Vidsys is pleased to announce the addition of the following Video Connectors to its existing library of connectors:

  1. Digifort v7.2
  2. Milestone XProtect Corporate v2017
  3. Avigilon ACC v 6.2
  4. Pelco VideoXpert
  5. Flir Latitude 8.0

Using Vidsys’ CSIM Platform, security organizations can integrate and analyze information from traditional physical security devices and systems, and resolve situations in real time.

Vidsys NVR connectors integrate 3rd party NVR/DVR’s with Vidsys CSIM software, allowing operators to view real-time and recorded video from their desktops.  Video can be displayed in response to manual user selection, and can be automatically displayed when an event detected by CSIM-integrated access control, intrusion detection or other system(s) is reported.

CSIM operators can control PTZ cameras and playback stored video using standard controls (forward, pause, reverse, etc.) that are consistent across different video recorder products.  Operators may define and store video clips and snapshots in CSIM situation records to facilitate post-event analysis.

Vidsys offers a growing list of connectors that enable integration between the Vidsys CSIM platform and other industry-leading converged and physical security products.

If you would like to find out more about this integration or other integrations, contact us here for more information or a demo.

 

This entry is part of a blog series on Integrations and Connectors. You can revisit previous entries here